The main menu choose the pattern to be displayed such as the ribbon and rainbow from the demo mode 'SELECT DEMO', to adjust the brightness, 'BRIGHTNESS', it is possible to adjust the speed to move the Pixelstick 'SPEED', press the start button light is open between until the lights 'COUNTDOWN', decide whether the move from the left or move from right to left to right 'DIRECTION', to invert the top and bottom of the image 'VERTICAL FLIP', in the folder each time you press the button image is reproduced one after another 'INCREMENT', the same image repeatedly display 'REPEAT', emits maximum brightness for each image 'XTRA bRIGHT', light is displayed on the screen information after lights 'POSTSHOOT dATA', 'sTARTUP PATTERN' for displaying the problem has not occurred LED at startup to adjust the contrast of the LCD screen 'LCD cONTRAST', Advanced menu such POSTSHOOT DATA and XTRA BRIGHT The-menu can be hidden there and 'ADVANCED'.Īdjust brightness and speed with the percentage up and down as below. Press the control button located in the middle of the controller to select it. It is easy to select lighting painting simply by choosing a menu from this demo mode and pressing the orange button and moving the main body.Īfter a while the main menu was displayed. The controller has an SD card slot on the side, it is possible to create art of light by reading the data of the SD card, but when the SD card is not inserted, the demo mode will be activated. First turn on the power switch on the top right of the controller. You do not need to attach a spin handle, but it is convenient when you want to rotate the Pixelstick main unit. Pixelstick is packed with about 200 full-color LEDs in an aluminum frame and has a structure with milky white frost cover on it. The total length is as long as 187 cm, but the weight is about 3 kg so it was possible to have it with the hands of women. The cable is refreshed when it is fixed to the housing using the attached clip. With such a feeling, put out the cable from the end of the holder. When you insert 8 batteries into the holder again. Let's tighten the screws after inserting the handle.īecause there is a battery back in the battery holder. Next we will loosen the thumbscrews on the part that connects the handle support with the handle. Tighten the screw loosened as soon as it is connected. With this feeling, connect the two housings firmly so that no gaps will be formed. Loosening will create a gap between the threaded tip and the handle support, so we will insert the parts of the top housing here. Loosen all thumbscrews of the handle support first. The top housing with the controller, the bottom housing with battery holder and handle support, handle, spin handle, battery cable, instruction manual, cable clip, cold shoe adapter included.įirst of all connect two housings and make it one.īecause the handle support is attached to the tip of the bottom housing. Since a long belt was also contained in the case, it is also possible to do a naname. It is possessed with hands, it is about this size with hands.Ī cushioning material was used in the case, so that the wall and the Pixelstick main body were not damaged even if it hit the wall during the move. Pixelstick - lightpainting evolved | HomeĪ black case appeared when opening the box. I actually tried using Pixelstick which can take pictures of light like SF works.

However, it is the scale that does not compare with it and it is possible to do a tremendous powerful light painting ' Pixelstick'. in front of the camera is a relatively major thing, using the iPhone Apps that can do light paintingHas also appeared. The technique called 'light painting' which shoots with the camera's multiple exposure mode by moving a flashlight etc. 21:00:00 I tried using 'Pixelstick (Pixel Stick)' which can make huge light painting easily

Pixelstick bmp